As we all know, standardized container is a widely used logistics product, which can be transported in various ways and used to transport a variety of products. Containers are everywhere in the shipping industry, transporting billions of tons of goods around the world every year.

Container floor is an important part of container. At present, the floor used by container is also increasingly diversified. According to its different uses, it can be divided into wood floor, bamboo floor, plastic floor, steel floor, fiber cement pressure plate, etc.

In the shipping industry, most of the container floors produced are plywood, which are made of 21 layers of equal thickness veneer or 21 layers of unequal thickness veneer through adhesive bonding, and the total thickness is fixed at 28 ± 0.5mm. In the past, its wood was mostly tropical hard wood, mainly produced in Southeast Asia (such as Indonesia), mainly including clonal wood and Abitong. With the rapid growth of container production and the reduction of the number of tropical hardwood, flooring manufacturers in the world are replacing tropical hardwood with other wood.

When laying the container floor, it is necessary to ensure that there is no step difference between the joints between the wooden floors to prevent the goods from getting in and out during use, which greatly increases the difficulty of floor construction. The container floor and the steel underframe of the container are connected with Tapping Screws. The installation position of the screws needs to be determined by marking on the floor surface when installing the floor.

When it comes to container floor, we will pay more attention to cost performance and professional services. At present, most of the container spare parts used in the container repair and modification industry in the world are provided by us. Our predecessor is CIMC Spare Parts Service Center. At the same time, we are keen to improve our products and services, including our best-selling product - container plywood floor.

Specification of container plywood floor

Thickness: 28mm

Width: 1160mm or 1220mm

Length: 2400mm or 2440mm, different specifications can be customized.

Generally, the specification of the wooden floor of the container is 2400x11160x28mm, and some customers use 2440x1220x28mm. Of course, many customers can customize different specifications according to their actual needs.

Product features

According to the IICL international standard, it can pass the 7260 kg test and 6250 kg test of the trolley, and has the characteristics of being used in harsh environments such as severe humidity at sea. It is waterproof, moisture-proof, anti-corrosion and insect-proof. The surface of the clone wood can withstand repeated rolling of the container during loading and unloading, and its wear resistance is very significant. Some customers can properly paint the surface according to their own needs to extend the floor life. Generally speaking, in order to meet the current market demand, we have developed different types of container floor, including different grades of bamboo and plywood container floor, according to the production cost and IICL short-span test performance.

Packaging instructions

The container plywood floor can be stacked with many pieces and does not occupy too much space. During transportation, it only needs to be supported by plywood pallets under it to facilitate loading and unloading by forklift. If you have special requirements for packaging, please contact us. We will cooperate and try our best to meet your needs.

Recently, one of our customers ordered 10 containers of container plywood floor at one time. This customer has high requirements for the quality, packaging, and packing of container plywood floor. From the photos taken in all links, you will find that our container plywood floor is very professional in all aspects, including material selection, processing, packaging and packing, and is absolutely worthy of your trust.

In addition to shipping container floor, twist lock, container corner casting, container locking device,lashing equipment, container corner post, container cross member, container gasket etc. are all very good container parts sold by CIMC Equilink. Our customers will buy together with the above products.

CIMC Equilink provides all kinds of dry container parts,. reefer container parts and iso tank parts. If you are looking for container parts or shipping containers for sale from China, or you just have questions about container declaration and transportation, please visit us by email（info.equilink@cimc.com）or submit a quick quote.

Share: